The base of the scaffold is flat, compacted and hardened by concrete. The base should be hardened by 100mm thick C25 concrete, and the base or cushion plate should be set at the bottom of the pole. The backing plate shall be a wooden backing plate with a length of not less than 2 spans, a thickness of not less than 50 mm, and a width of not less than 200 mm.
Floor-type scaffolding must be provided with vertical and horizontal sweeping rods, and the vertical sweeping rods should be fixed on the poles immediately below the longitudinal sweeping rods by direct fasteners. When the base of the pole is not at the same height, the longitudinal sweeping bar at the height must be extended to the lower two spans and fixed to the pole, the height difference should not be greater than 1m, and the distance between the slope of the pole axis and the slope above the tight slope is not less than 500mm .
The scaffolding foundation should be provided with drainage measures around the base. The elevation of the bottom of the scaffolding base should be 50mm higher than the outdoor natural floor. A drainage ditch with a cross-section of not less than 200mm × 200mm should be provided outside the pole base to ensure that the scaffolding foundation does not collect water.
The construction of scaffolding is usually the top priority of construction safety. Only when the construction of scaffolding is done well can we be qualified to talk about safe and civilized construction. In actual construction, accidents caused by scaffolding are not uncommon, causing
Countless casualties and property losses. Therefore, the construction safety of the scaffolding should be guaranteed from the details, and the operation should be strictly in accordance with the construction points of the scaffolding. The following scaffolding and internal support
The company's standard practice for supporting and unloading platforms should be kept in mind during the construction of each project department of Huayang Construction.
Copyright © 2019 huangyangjianshe.com All Rights Reserved.