The surface of even wall parts should be painted with red eye-catching paint for easy inspection and warning.
The scaffolding must use rigid connecting wall pieces.
The connecting wall parts should be set from the longitudinal horizontal bar at the first step of the ground floor. When there is difficulty in this place, reliable measures should be taken to fix it. Diamond-shaped arrangement should be preferred for connecting wall pieces, and square or rectangular arrangement can also be adopted.
The connecting wall parts should be set close to the main node, and the distance from the main node should not be greater than 300mm. The spacing of the connecting wall parts shall be in accordance with the design calculation regulations and shall comply with the following table "Maximum spacing of the connecting wall parts".
Straight-frame and open-type scaffolding must be provided with connecting wall parts at both ends. The vertical distance between the connecting wall parts should not be greater than the storey height of the building and should not be greater than 4m (two steps).
The construction of scaffolding is usually the top priority of construction safety. Only when the construction of scaffolding is done well can we be qualified to talk about safe and civilized construction. In actual construction, accidents caused by scaffolding are not uncommon, causing
Countless casualties and property losses. Therefore, the construction safety of the scaffolding should be guaranteed from the details, and the operation should be strictly in accordance with the construction points of the scaffolding. The following scaffolding and internal support
The company's standard practice for supporting and unloading platforms should be kept in mind during the construction of each project department of Huayang Construction.
Copyright © 2019 huangyangjianshe.com All Rights Reserved.Powered by Metinfo