工程案例
Project Gallery

Pinghu Jieli Machinery

Zhejiang Huayang Construction Co., Ltd.
Projects:

Project Name: Pinghu Jieli Machinery Technology Co., Ltd. Factory Project Location: No. 2235, Jinpinghu Avenue, Caoqiao Street

Design unit: Jiaxing Zhongda Construction Design Co., Ltd. Construction unit: Pinghu Jieli Machinery Technology Co., Ltd.

Supervision unit: Jiahai Juxin Construction Co., Ltd. Construction unit: Zhejiang Huayang Construction Co., Ltd.

Structure type: shear wall structure; this project is located at No. 2235, Jinpinghu Avenue, Caoqiao Street, with a total construction area of 9639. 42 m’. This project is an 11-storey frame structure workshop, with a height of 8.0 meters on the first floor, 4.5 meters on the second floor, 4.5 meters on the fourth floor, and 3.9 meters on the 11th floor on the fifth floor.


浙江华洋建设有限公司

脚手架概况:

    J-N轴8层楼面以上采用悬挑式双排单立杆外脚手架。
    根据本工程特点,J-N 轴8层楼面以上脚手架采用悬挑式钢管扣件脚手架。采用16#工字钢为悬挑梁,配φ 12 mm斜拉钢丝绳,U字扣及花篮螺栓与相应钢丝绳配套,架体采用中48X3.0mm钢管搭设。悬挑起点标高33.20米,悬挑脚手架每挑高度均大部分为为15.6m,横距为1.00m,最大纵距1.5m,步距1. 8m,外架离墙净距0.25m。脚手架荷载按装饰施E荷载取2.0KN/m?。


浙江华洋建设有限公司浙江华洋建设有限公司

Copyright © 2019 huangyangjianshe.com All Rights Reserved.

Technical Support:Dreamsoar